SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 629

Removal and Installation
Preceding work: Disconnect negative battaery cable.
* Make sure that the oil cooler pipe hose is not be twisted,
oil cooler pipe (radiator side) is not clogged. If it is con-
taminated with foreign materials, thoroughly clean before
replacing transmission assembly (This work is neces-
sary when removing and installing the radiator).
1. Unscrew the bolts and remove the front and rear propeller shafts.
Front propeller shaft
Oil draining
DC 5-SPEED AUTOMATIC TRANSMISSION
REXTON SM - 2004.4
Rear propeller shaft
Removed
* If necessary, drain the oil. However,
when removing or installing the
transmission without any other
processes, just add oil excluding
drainage.
Installation Notice
Tightening torque
EFFECTIVE DATE
3A1-77
Y220_3A1087
14 Nm
Y220_3A1088
CHANGED BY
AFFECTED VIN