High Pressure System Pressure Test; Fuel Rail Pressure Test - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

4-1. High Pressure System Pressure Test

Fuel Rail Pressure Test

1. Disconnect the fuel rail pressure sensor connector and
IMV connector.
2. Install the pressure tester in tool kit to the fuel rail
pressure sensor connector.
3. Crank the engine for 5 seconds (twice).
- Read the maximum pressure displayed on the tester.
- If the maximum pressure is below 1,050 bar, refer to
"Fuel System Check Process" section.
DIAGNOSIS
DI ENG SM - 2004.4
DI10-185
Y220_10068
Y220_10069
Y220_10070
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN