SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 999

5. If it cannot be removed, hold the welding area with vise
and remove the needle bearing by using a suitable drift
and hammer.
6. Disassemble the universal joint.
The universal joint compensates the angle changes due
to vertical movement of the axle shaft.
7. Remove the intermediate bearing bracket and remove
the bearing with special tool.
PROPELLER SHAFT
REXTON SM - 2004.4
Bracket
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
4C-11
Y220_04C015
Y220_04C016
Y220_04C017