SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 958

6. Measure the backlash between drive pinion and ring gear.
Specified value
7. Install the axle housing cover.
Tightening torque
8. Assemble the front axle inner shaft and housing mounting
bracket components.
Notice
Apply the grease to the oil seal rib.
9. Insert the inner shaft into the differential carrier. Assemble
the axle housing mounting bracket and axle housing.
Tightening torque
FRONT AXLE
REXTON SM - 2004.4
0.13 ~ 0.20 mm
39 ~ 46 Nm
80 ~ 100 Nm
4A-23
Y220_04A055
Y220_04A056
Y220_04A057
Y220_04A058
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN