SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 942

4. Unscrew two bolts (arrows) and remove the brake caliper
assembly.
Notice
Be careful not to damage the brake oil hose.
5. Vehicle with part time transfer case only.
1) Remove the hub mounting bolt and washer, and
remove the hub cover.
2) Remove the retainer ring and outer shim between
hub body and drive shaft, and remove the locking
hub.
Installation Notice
• Adjust the clearance between snap ring and hub
cover with appropriate shims (shim thickness: 0.
2, 0.3, 0.5 and 1.0 mm) so that it is below 0.2 mm.
• Be careful not to damage the O-ring in locking
hub.
3) Remove the locking hub from steering knuckle.
FRONT AXLE
REXTON SM - 2004.4
4A-7
Y220_04A007
Y220_04A008
Y220_04A009
Y220_04A010
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN