Auto Door Lock - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

9B-24

Auto Door Lock

1. All door lock relay outputs are "ON" when the vehicle speed keeps over V1 while the IGN 1 switch turns "ON".
However, if all doors are locked or failed, the output will not be "ON".
2. If any of doors is unlocked after outputting the "AUTO DOOR LOCK", "LOCK" output can be done up to 5 times.
3. If any of doors is unlocked after 5 times of "LOCK" outputs, the door is regarded as "FAIL". However, the door that
is changed to "UNLOCK" from "LOCK" during the 5 outputs will not be regarded as "FAILED". If the door that was
regarded as "FAIL" will be unlocked again, only one "LOCK" output will be done.
4. If the door that was "LOCK" is changed to "UNLOCK", only one "LOCK" output will be done.
5. Do not try "AUTO DOOR LOCK" operation for the vehicle speed after the completion of auto door unlock operation.
6. The "FAIL" is erased when turning "OFF" the IGN 1 switch.
7. All doors unlock relay output are "ON" when turning "OFF" the IGN 1 switch after completion of step 1 operation.
(However, the vehicle speed input can be detected from 1.5 seconds after turning "ON" the IGN 1 switch.)
OVER V1
VEHICLE SPEED
BELOW V1
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Y220_09B071
ELECTRIC SYSTEM
REXTON SM - 2004.4