Planet Carrier Assembly And Centre Support - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

4. Mount the clutch assembly on clutch spring compressor
0555-336259 and compress the piston return spring.
5. Remove the circlip and release the spring.
6. Remove the tool, circlip, keeper and spring.
Notice
Make sure that the spring keeper has not been caught
in the circlip groove, and that all spring pressure has
been released, before removing the tool.
7. Remove the sealing rings from the C3 clutch cylinder.
8. To remove the clutch piston from the clutch cylinder, apply
air pressure to the port between the iron sealing rings on
the bearing journals of the cylinder.
9. Remove the reverse sun gear and C3 washer from the
cylinder.
Planet Carrier Assembly and Centre
Support
1. Remove the No. 9 (2) needle bearing and washer (1) from
the output shaft and the planet carrier.
2. Separate the centre support from the planet carrier by
rotating it anti-clockwise.
3. Lift the one way clutch (1) from the planet carrier (5).
4. Remove the circlip (2) retaining the one way clutch outer
race (3) in the planet carrier and remove the race.
5. Remove the one way clutch retainer (4) from the planet
carrier.
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4
3A2-169
Y220_3A2730
Y220_3A2740
Y220_3A2750
Y220_3A2760
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN