SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 949

4A-14
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Removal and Installation
Preceding work: Removal of axle shaft
1. Remove the propeller shaft from the front axle input shaft.
Installation Notice
Tightening torque
2. Remove the steering gear linkage.
Y220_04A027
3. Remove the breather hose.
Y220_04A027A
4. Remove the axle housing mounting nut (1).
Installation Notice
Tightening torque
5. Support the axle housing with safety jack and remove the
axle housing mounting bracket nut (2).
Installation Notice
Tightening torque
6. Remove the axle housing assembly while lowering the
jack very carefully.
Y220_04A027B
7. Install in the reverse order of removal.
70 ~ 80 Nm
80 ~ 100 Nm
68 ~ 93 Nm
FRONT AXLE
REXTON SM - 2004.4