Seat Position And Warmer Unit; Function Description - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

9D-44

FUNCTION DESCRIPTION

Seat Position and Warmer Unit

This unit is installed under the driver's seat and functions as follows:
- Memory return of driver's and passenger's seat
- Memory return of outside rearview mirror
- Warming up the driver's and passenger's seat
- Folding the outside mirrors
Specifications
Description
Seat
Lift (front/rear)
Warmer (driver's/
passenger's)
Up/Down
Outside
Left/Right
rearview mirror
Memory Setting
Description
Slide
Seat Recline
Lift (front/rear)
Up/Down
Outside
rearview
mirror
Left/Right
Memory Return
Item
Operating procedure
Input another condition during
memory recall operation
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Operating Range
Slide 228 ± 3mm
23° ↔ 0° ↔ 48°
Recline
40 ± 5°C
Folding
Memory Procedure
1. IGN "ON"
2. P/N SW "ON" or Parking SW "ON"
3. Pressing the setting button for over 0.1
second (buzzer sounds once)
4. Pressing a position button (1, 2, 3)
within 5 seconds
5. Indicator blinks for setting period (5
seconds) and buzzer sounds twice at
end of operation
1. Ignition key "ON"
2. P/N switch "ON" or Parking switch "ON"
3. Vehicle stationary (vehicle speed 0 km/h)
4. Operating a position button (1, 2, 3) for over 1.5 seconds
- When pressing a position button (1, 2, 3) again, the latest input value
is recalled
- When pressing the stop button or operating manually, the memory
recall operation is immediately stops
30 ± 3
Operating with ignition switch "ON"
± 8°
± 8°
± 67°
30 seconds delayed operation after
turning the ignition switch to "OFF"
- 5 seconds after pressing set button
- Manually operating the seat or
- GN "OFF"
- When canceled by manual
Description
Operating Condition
Operating regardless of ignition
switch positions
Memory Setting
outside rearview mirror switch
operation, buzzer sounds 5 times
and able to set 5 seconds after then
SWITCHES
REXTON SM - 2004.4