Shock Absorber Assembly Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Installation
1. Install the coil spring (shock absorber) assembly and
yoke. To do this, arrange the bottom of the shock absorber
to yoke clevis and insert the top of it into the bolt hole,
and temporarily tighten the nut by hand.
Tightening torque
2. Tighten the lock bolts to shock absorber assembly and
yoke. Make sure to insert the bolt from unthreaded side
(A) to the threaded side (B).
Tightening torque
3. Align the shock absorber yoke to the lower arm bolt hole,
insert the yoke lock pin, and tighten the lock nut.
Tightening torque
FRONT SUSPENSION
REXTON SM - 2004.4
40 ~ 60 Nm
60 ~ 70 Nm
150 ~ 180 Nm
7A-13
Y220_07A019
Y220_07A020
Y220_07A021
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN