SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1472

10C-6
SYSTEM OVERVIEW
Evaporator
The unit in an air conditioning
system used to transform
refrigerant from a liquid to a
gas. It is at this point that
cooling takes place as heat
is removed from the air.
1. A/C switch
2. Coolant temperature
3. Engine conditions
4. Driving conditions
Condenser
The part of refrigeration
mechanism which receives
hot, high-pressure
refrigerant gas from
compressor and cools
gaseous refrigerant until it
returns to its liquid state.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Cooler Outlet
Discharging Hose
Charging Hose
Outlet Port
Engine ECU
Cooling Fan
High Temperature/Pressure Gas
High Temperature/Pressure Liquid
Inlet Port
Blower
An electric motor-driven fan which
forces air through the evaporator
and duct assembly, then forces
the cooled air out of the duct work
and circulates it through the
vehicle passenger compartment
Expansion Valve
A device that
converts high
pressure liquid
refrigerant into low
pressure liquid
refrigerant (thus
Compressor
lowering its boiling
point) before it
A mechanism in a
passes through the
refrigerator or air
evaporator
conditioner that
pumps vaporized
refrigerant out of
the evaporator,
Inlet Port
compresses it to a
relatively high
pressure and then
delivers it to the
condenser.
Receiver Drier
A device on the high side of an
air-conditioning system,
somewhere between the
condenser and the expansion
valve, which stores excess
refrigerant and removes
moisture from the refrigerant.
Low Temperature/Pressure Liquid
Low Temperature/Pressure Gas
Y220_10C001
A/C SYSTEM
REXTON SM - 2004.4