SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 705

Condition
Harsh 1-2 shift
Stalls when Drive or Reverse
Selected Shudder on Rolldown
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4
Possible Causes
• Faulty inhibitor switch.
• Faulty throttle position sensor.
• Incorrect front band adjustment.
• Damaged front servo piston "O"
rings.
• Faulty or damaged variable pressure
solenoid (S5).
• Faulty S1 or S4 solenoid.
• Faulty Band Apply Regulator (BAR)
valve.
• Misassembled front servo return
spring.
• Jammed Converter Clutch Control
Valve (CCCV).
• Faulty solenoid 7.
Action
• Check the resistance. Replace the
inhibitor switch as necessary.
• Inspect and replace the sensor as
necessary.
• Inspect and adjust the band as
necessary.
• Inspect and replace the "O" rings as
necessary.
• Inspect, repair or replace S5 as
necessary.
• Inspect, repair or replace S1 or S4
as necessary.
• Inspect, repair or replace the BAR
as necessary.
• Inspect and repair as necessary.
• Inspect and clean CCCV.
• Inspect, repair or replace as
necessary.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
3A2-47