SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 884

Code
P1843 Shift system timeout
P1844 Too low position encoder voltage
(Stuck in Low)
P1850 Defective position encoder
P1851 Short to ground for position encoder 1
P1852 Short to ground for position encoder 2
P1853 Short to ground for position encoder 3
P1854 Short to ground for position encoder 4
PART TIME
REXTON SM - 2004.4
Description
- 2H-4H: after 1.5 seconds
- 4H-4L: after 3 seconds
- Check the relevant harnesses for contact.
- Replace TCCU if necessary.
- When no signals from the position encoder
- Check the relevant harnesses for contact.
- Replace TCCU if necessary.
- When the position encoder is defective
- Check the relevant harnesses.
- Check the relevant connectors for contact.
- Check the shift motor.
- Short to ground for position encoder 1 in shift motor
- Check the relevant harnesses for short.
• TCCU pin No.18
- Check the relevant connectors for contact.
- Check the shift motor.
- Short to ground for position encoder 2 in shift motor
- Check the relevant harnesses for short.
• TCCU pin No.5
- Check the relevant connectors for contact.
- Check the shift motor.
- Short to ground for position encoder 3 in shift motor
- Check the relevant harnesses for short.
• TCCU pin No.19
- Check the relevant connectors for contact.
- Check the shift motor.
- Short to ground for position encoder 4 in shift motor
- Check the relevant harnesses for short.
• TCCU pin No.17
- Check the relevant connectors for contact.
- Check the shift motor.
Action
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
3D-23