SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 741

3A2-192
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
13. Install the converter clutch control valve, spring, plug,
and "O" ring.
14. Install the retaining pin.
Y220_3A21H0
15. Install the converter release check ball and spring.
16. Install the gasket on the pump cover.
Y220_3A21J0
17. Install the cover plate, solenoid 7 with the retainer and
the solenoid wiring retainer to the pump cover, ensuring
that the periphery of the cover plate is flush with the
periphery of the pump cover.
18. Tighten the screws to specification in the order.
(1-5)
Installation Notice
Tightening torque
19. Tighten the solenoid 7 screw.
Installation Notice
Y220_3A21K0
Tightening torque
• Check that neither the wiring nor the connector
protrudes excessively, in order that at assembly neither
the wiring and the connector contacts or rubs on the
input shaft or the C1/C2 clutch cylinder.
13 ~ 16 Nm (10 ~ 12 lb-ft)
13 ~ 16 Nm (10 ~ 12 lb-ft)
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4