Starter Lock-Out Contact - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3A1-34

Starter Lock-out Contact

1. Plunger
2. Permanent magnet
Function
The starter lock-out contact is installed beside oil temperature sensor and is actuated by a cam rail, which is located on
the latching plate.
In the selector lever positions "P" and "N", the permanent magnet is moved away from the reed contact. This opens the
reed contact and the transmission control module receives an electrical signal. The transmission control module acti-
vates the starter lock-out relay module. This closes the electrical circuit to the starter in selector lever positions "P" and
"N" via the starter lock-out relay module. In other words, when the selector lever is in driving positions, the contact is
closed and the starter cannot be operated.
Circuit diagram
Ignition switch 50
Starter
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
3. Reed contact
Start lock-out contact
Oil temperature sensor
AD converter
DC 5-SPEED AUTOMATIC TRANSMISSION
REXTON SM - 2004.4
Y220_3A1037
Y220_3A1038