Speed Sensor Removal And Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3E-38
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SPEED SENSOR
Removal and Installation
1. Disconnect the negative battery cable.
2. Remove the shift motor assembly.
3. Disconnect the front and rear speed sensor connector
(white, 7-pin) at the rear top section of the transfer case.
4. Disconnect the speed sensor connector from the locking
sleeve.
5. Remove the wire fixing retainer at the rear side of
disconnected connector.
Y220_03E030
6. Remove the rear speed sensor bolts on the rear case
flange.
Y220_03E031
7. Remove the rear speed sensor with a suitable tool.
Notice
Do not apply excessive force to protect mounting area
and sensor.
Y220_03E032
TOD
REXTON SM - 2004.4