SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1059

6C-12
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
4. Install the steering lower shaft to the gear box. The joint
bolt should be inserted from "A" (no threaded side) to "B"
(threaded side).
Tightening torque
Notice
The joint bolt (1) should be inserted the groove in
pinion shaft spline when installing the lower shaft.
Y220_06C016
5. Install the tie rod end to the steering knuckle, tighten the
slotted nut, and insert new split pin.
Tightening torque
Y220_06C017
6. Install the supply and return pipes.
Supply pipe (2)
Return pipe (1)
Y220_06C018
7. Install the supply pipe to the steering gear pump.
Y220_06C019
25 ~ 30 Nm
35 ~ 45 Nm
12 ~ 18 Nm
12 ~ 18 Nm
POWER STEERING
REXTON SM - 2004.4