4A-8
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
4) Remove the hub and brake disc assembly.
Y220_04A011
6. Vehicle with full time transfer case only
1) Remove the hub nut and washer.
2) Remove the front disc assembly from axle shaft.
Installation Notice
Replace the nut with new one, and caulk the nut
end to lock the nut. After caulking, apply grease
or paint on the caulked area.
Y220_04A012
3) Unscrew the wheel bearing bolts (M12 x 3, hexagon
wrench type) and remove the hub assembly with
special tool.
Installation Notice
Replace the wheel bearing bolts with new ones with
Loctite applied (blue).
Y220_04A013
7. Unscrew the bolts (M6 x 2) and remove the dust shield.
Y220_04A014
FRONT AXLE
REXTON SM - 2004.4