SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 997

Installation
1. Check the removed elements.
2. Align the marks on each propeller shaft.
3. Install the front propeller shaft.
Axle
Transfer case
4. Place the rear propeller shaft between transmission and
axle housing and temporarily install the intermediate
(center) bearing.
Tightening torque
5. Install the rear propeller shaft with the aligning the marks
and tighten the intermediate bearing.
Axle side
Transfer case side
PROPELLER SHAFT
REXTON SM - 2004.4
70 ~ 80 Nm
80 ~ 88 Nm
80 ~ 95 Nm
70 ~ 80 Nm
80 ~ 88 Nm
4C-9
Y220_04C009
Y220_04C010
Y220_04C011
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN