4A-6
REMOVAL AND INSTALLATION
FRONT AXLE SHAFT (FOR PART TIME T/C)
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Removal
1. Remove the tire.
Y220_04A004
2. Vehicle with ABS system (Only for part time T/C equipped
vehicle)
Unscrew the mounting bolt and remove the wheel speed
sensor and cable from steering knuckle.
Y220_04A005
3. Remove the split pin from steering linkage mounting.
Remove the slotted nut and separate the knuckle arm
and linkage.
Notice
Change new one whenever install split pin.
Y220_04A006
FRONT AXLE
REXTON SM - 2004.4