Shift Pressure Control Solenoid Valve - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3A1-26

Shift Pressure Control Solenoid Valve

1. Leaf spring
2. Contact spring
3. Conductor track
4. O-ring
5. O-ring
6. Shift plate
Function
The plastic Electric Hydraulic Control Unit (EHU) is installed on the top of valve body. RPM sensor, start lock-out switch
and oil temperature sensors are integrated in EHU.
The 13-pin connector is connected to automatic transmission via PCB.
Three up/downshift solenoid valves are installed on the top of hydraulic control unit.
The solenoid valves are sealed with two O-rings against the valve body. The solenoid valves are pressed against the valve
body by the leaf springs.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7. Solenoid valve
A. 1-2, 4-5 shift solenoid valve
B. 3-4 shift solenoid valve
8. Solenoid valve
C. Shift pressure control solenoid valve
D. Modulating pressure control solenoid valve
9. Solenoid valve
E. Lockup PWM solenoid valve
F. 2-3 shift solenoid valve
DC 5-SPEED AUTOMATIC TRANSMISSION
Y220_3A1024
REXTON SM - 2004.4