SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1439

10A-34
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
3. Remove the two PTC wiring harness bolts.
- One at PTC ground cable
- One at wiring harness (heater core side)
Y220_10A1061
4. Remove the heater core.
5. Disconnect the PTC connector (slide lock type
connector).
6. Remove the PTC wiring harness from the heater
assembly.
Y220_10A1062
7. Unscrew the bolts and remove the PTC.
Installation Notice
Make sure that the label attached surface is facing to
driver seat when installing.
Y220_10A1063
8. Install in the reverse order of removal.
FFH/PTC SYSTEM
REXTON SM - 2004.4