Tire Removal And Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

REMOVAL AND INSTALLATION
Tire
1. Remove the wheel cap.
2. Support the vehicle with safety jack. Loosen the wheel
nuts and raise the vehicle carefully.
3. Remove the wheel nuts.
4. Install in the reverse order of removal.
Notice
• Clean the mating surface of wheel and hub. Do not
apply grease or oil to bolts and nut. It may cause
the looseness of the fasteners.
• Lift up the vehicle until the tire is off approx. 3 mm
from ground.
• Tighten the wheel nuts by the order as shown in
the figure with several steps.
Tightening torque
WHEELS & TIRE
REXTON SM - 2004.4
Aluminum wheel: 120 ~ 130 Nm
5A-9
Y220_05A011
Y220_05A012
Y220_05A013
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN