Ecu (Including Solenoid Valves – Esp Equipped Model) - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Table of Contents

Advertisement

8E1-16
(Pumping)
When the cam pushes the left plunger during motor operation,
the system pressure is generated in the left cylinder. At this
time, the right plunger is expanded by spring force and the
expanded volume of the right cylinder draws the brake fluid.
ECU (Including Solenoid Valves –
ESP Equipped Model)
HECU controls the hydraulic valves by supplying or cutting off
the voltage to solenoid valves depending on the wheel speed
and other information from wheel speed sensors.
The figure shown in left side is for ESP ECU. There are two
channels for front wheels and one channel for rear wheels.
Each channel has one inlet and one outlet valve, therefore,
there are six solenoid valves.
(ECU lower cover)
The electrical components are weak to moisture. To protect
ECU, GoreTex-based plate is used at ECU lower cover. The
vent hall (arrow) allows air to ventilate but does not allow mois-
ture to penetrate.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Y220_8E1021
Y220_8E1022
Y220_8E1023
ABS
REXTON SM - 2004.4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents