Hydraulic Circuit After Shifted To 1St Gear - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3A1-70

Hydraulic Circuit After Shifted to 1st Gear

14. 1-2/4-5 command valve
15. 1-2/4-5 holding pressure shift valve
16. 1-2/4-5 shift valve
18. 1-2/4-5 pressure overlap control valve
The end face of 1-2/4-5 command valve (14) is kept unpressurized via the 1-2/4-5 solenoid valve. The operating pressure
is applied to the brake B1 via the holding pressure shift valve (15). The clutch C1 is unpressurized. The operating
pressure from brake B1 acts against the holding pressure shift valve (15) and the end face of 1-2/4-5 shift pressure shift
valve (16).
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
1-2/4-5 shift solenoid valve
0. Return flow to oil sump
p-A. Operating pressure
p-MOD. Modulating pressure
p-S. Shift pressure
p-SV. Shift valve pressure
DC 5-SPEED AUTOMATIC TRANSMISSION
Y220_3A1078
REXTON SM - 2004.4