SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1000

4C-12
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Check
1. Visual Check
Check the components for wear and crack and replace if
needed.
2. Outer diameter of spider journal
Specified value
Y220_04C018
3. Clearance between spider journal and bearing
Specified value
Y220_04C019
4. Run-out of propeller shaft
Set up the dial gauge on the center point of propeller
shaft and measure the run-out. If the run-out is out of the
specified range, correct it with press or replace it with
new one.
Y220_04C020
5. Starting torque of universal joint
Specified value
6. Major causes of vibration
• Balance weights missing
• Excessive run-out of propeller shaft
• When using the general bolts
• Excessive wear of universal joint
• Stuck in sleeve joint
• Vibration is mainly caused by the angle changes in
front and rear universal joint. It normally occurs when
the vehicle speed is 60 ~ 100 km/h.
Y220_04C021
17.893 mm
Limit 17.910 mm
0.03 ~ 0.098 mm
Limit 0.25 mm
Limit
3 ~ 8 kg
0.4 mm
⋅
cm
PROPELLER SHAFT
REXTON SM - 2004.4