Rear Axle Housing Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

10. Remove the stabilizer bar.
11. Unscrew the nuts and remove the lateral rod from axle
housing.
12. Remove the coil spring and spring seat while lowering
one end of axle very carefully.
13. Lower the safety axle very carefully to remove the axle.
Installation
1. Place the rear axle housing in the installation position
and install both coil springs.
REAR AXLE
REXTON SM - 2004.4
4B-15
Y220_04B028
Y220_04B029
Y220_04B030
Y220_04B031
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN