SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 714

3A2-166
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
5. Using cross shaft pin remover/installer (detent le-ver)
0555-336258, press the pin from the cross shaft and
withdraw the shaft from the case.
6. Remove the cross shaft pin and spring.
7. Remove the manual valve lever and the park rod.
Y220_3A2600
8. Depress the tangs and withdraw the 10 pin connector
into the case. Remove the wiring loom assembly.
Y220_3A2610
9. Detach the No.7 solenoid wire from the front of the case.
10. Remove the parking pawl pivot pin and the pawl and spring
from the case.
11. Remove the shaft and the rear servo lever.
Y220_3A2620
12. Remove the rear servo cover and piston assembly.
13. Remove the B1R circlip, valve and spring.
14. Remove both band adjustment shims.
15. Inspect the output shaft bushing in the case and replace
if necessary.
16. Inspect cooler line fittings and replace as necessary.
17. Inspect the case for damage.
Y220_3A2630
BTRA 4 AUTO TRANSMISSION
REXTON SM - 2004.4