Clutch Disc; Inspection Procedure - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3C-16
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

INSPECTION PROCEDURE

Clutch Disc

1. Clutch cover assembly
• Check the diaphragm spring tip for wear and height
unevenness.
Unevenness limit
• Check the pressure plate surface for wear, crack and
discoloration.
• Check the strap plate rivet for looseness and replace
if necessary.
Y220_03C028
2. Clutch disc
• Check the facing for rivet looseness, sticks, oil and
grease.
• Measure the rivet head depth. If out of limit, replace
the disc.
Y220_03C029
3. Clutch disc run-out
• Measure the clutch disc run-out and replace if
necessary.
Run-out limit
Y220_03C030
Wear limit
0.8 mm
0.3 mm
0.7 mm
CLUTCH
REXTON SM - 2004.4