Front Heater And Blower Module Assembly - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

10B-28
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Front Heater and Blower Module
Assembly
1. Disconnect the blower connector and PTC connector.
Y220_10B033
2. Unscrew the nuts and remove the blower module along
with the evaporator.
Installation Notice
Tightening torque
Notice
The air conditioner pipes should be removed before
this operation.
Y220_10B034
3. Unscrew the bolts and remove the heater module
assembly.
Notice
Correctly align the electronic control module onto
the shift plate by using two central pins when
installing.
Y220_10B035
4. Install in the reverse order of removal.
• Install the heater module.
Tightening torque
• Install the blower module assembly.
Tightening torque
• Connect the blower connector and install the heater
hoses and air conditioner pipes.
Y220_10B036
10 ± 1.0 Nm
5 Nm
5 Nm
HEATER & VENTILATION SYSTEM
REXTON SM - 2004.4