SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1033

6. Install the multifunction switch assembly to the steering
column shaft.
7. Install the contact coil to the steering column shaft.
Notice
When adjusting the neutral position of contact coil,
rotate the contact coil to clockwise direction until it
stops and then again rotate it by 2.9 ± 0.2 to
counterclockwise direction. Align the
on the contact coil.
8. Connect all the connectors.
9. Install the steering column cover and instrument panel.
STEERING COLUMN
REXTON SM - 2004.4
marks
6A-11
Y220_06A024
Y220_06A025
Y220_06A026
Y220_06A027
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN