SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 894

7. Clean the mating surface of the transfer case and shift
motor.
Notice
Do not disassemble the shift motor since it is replaced
as an assembled unit.
8. Apply sealant on the mating surface if new shift motor
assembly.
9. Install in the reverse order of removal. Make sure that
the mode switch selection is matched with the motor's
driving position before installation.
Notice
To do that, install a new shift motor on the same
location that the used shift motor was on.
PART TIME
REXTON SM - 2004.4
3D-33
Y220_03D040
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN