SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 815

9. Check the conditions of each synchronizer sleeve and
hub.
• Engagement of hub and sleeve
• Wear on cone clutch surface in blocking ring (brass)
engaging the gears
10. Measure the clearance between blocking ring and speed
gear.
• New 1/2 gear blocking ring: 0.87 ~ 1.4 mm
• New 3/4 gear blocking ring: 0.88 ~ 1.5 mm
Notice
If the clearance is excessive, replace it with new one.
Otherwise, it may cause the missing or breakage of
the gears.
11. Check the speed gear clutch and synchronizer sleeve
for damage in teeth surface.
12. Check the engagement of synchronizer sleeve and speed
gear clutch.
TSM54/52 MANUAL TRANSMISSION
REXTON SM - 2004.4
3B-49
Y220_03B104
Y220_03B105
Y220_03B106
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN