4Wd Operation Overview; Selection Mode; 4L Mode; Releasing The 4L Mode - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

3E-4
Function

Selection Mode

The TOD system has 2 selectable mode, 4H and 4L.
4H is the normal operating mode when drive of which
gear ratio is 1:1 and 4L mode distributes power to front
and rear wheels 50:50 of which gear ratio is 2.48:1.

4WD Operation Overview

Application Mode Position
Driving type 4H
4L
4H ↔ 4L
Transferring
Note
To make the mode shift easier, stop the vehicle, depress the brake pedal, select the mode switch, and move the
selector lever with the sequence of [N-P-N].
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Y220_03E003
4WD Drive
Normal Driving on the normal road or highway, or high speed driving.
(High Speed)
Slipped road such as snow, rainy, sand, mud etc.
4WD Drive
Max driving force requiring condition such as towing, rough road.
(Low Speed)
Same function as part time transfer case 4L.
4WD Drive A vehicle should stop for transfer.
High Speed ↔
Manual Transmission
Low Speed
• Transfer starts after the vehicle stops and the clutch is applied
Automatic Transmission
• Transfer starts after the vehicle stops and the shift lever is shifted
[N] position.

4L Mode

When selecting 4L mode, EMC is locked to apply maximum
torque into front and rear propeller shafts. Shift motor rotates
also 4L position by rotation of cam thus propeller shaft torque
changes from 1:1 to 2.48:1 by planetary gear set.

Releasing the 4L Mode

When selecting 4H mode, 4L drive mode is released and 4H
mode is resumed.
• "4H" switch: Self-return type
• "4L" switch: Push lock type
Operation Condition
TOD
REXTON SM - 2004.4