SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1249

GENERAL INFORMATION
1. Before starting repairs which do not require battery power:
Turn off ignition switch.
Disconnect the negative battery cable.
Notice
• Turn off all the electrical devices before
disconnecting and connecting the negative battery
cable. Otherwise, the semiconductor components
are subject to be damaged.
• The volatile memory in electrical devices may be
erased. Store them with safe methods.
2. The harnesses that can be touched with a sharp edge or
corner should be wrapped with insulating tape to prevent
damaging.
3. Carefully handle the wiring harnesses not to damage
them during servicing the electric components.
4. If a fuse is blown, be sure to eliminate the cause of
problem before installing a new fuse. Use only the fuse
of specified rating. Never use a fuse of more than
specified rating. It may cause a fire or damage to the
electric components.
5. Be careful not to drop or jar the sensors and relays.
6. The electric components used in computer and relays
are heat sensitive. If the working temperature will be
exceeded 80°C, remove the components before starting
the service operation.
GENERAL
REXTON SM - 2004.4
9A-3
Y220_09A001
Y220_09A002
Y220_09A003
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN