Brake Hose/Pipe Installation - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

8A-20
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Installation
1. Engage the rear brake hose and tighten the union bolt.
Tightening torque
Y220_08A042
2. Engage the front brake hose and tighten the union bolt.
Tightening torque
Y220_08A043
3. Install the brake pipes at correct positions.
3-way connector
ABS/ABD control unit
Port section (M12)
4. Always bleed the air from the brake system after replacing
the pipes/hoses.
Y220_08A044
20 ~ 30 Nm
20 ~ 30 Nm
15 ~ 19 Nm
15 ~ 19 Nm
20 ~ 24 Nm
BRAKE SYSTEM
REXTON SM - 2004.4