SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1167

DISC BRAKE TYPE
Pad Thickness
1. Remove the front tires.
2. Measure the pad thickness. If the thickness is below
wear limit, replace it with new one.
Wear limit
Brake Disc Thickness
1. Measure the disc thickness at over four points.
2. If any of measured points is below the wear limit, replace
the brake disc with new one.
Wear limit
Brake Disc Run-out
1. Install the dial gauge on the side of brake disc and
measure the run-out while rotating the brake disc.
Limit
2. If the measured value exceeds the limit, replace the brake
disc with new one. Otherwise, it may cause the pedal
vibration and shimmy when braking.
REAR BRAKE
REXTON SM - 2004.4
2 mm
8.5 mm
0.03 mm (disk itself)
0.07 mm (when installed)
8C-23
Y220_08C051
Y220_08C052
Y220_08C053
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN