SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 627

Removal and Installation
1. Remove the leaf spring (5).
2. Remove the bolt (1).
Installation Notice
Tightening torque
3. Remove the shift housing (4) from valve housing (2).
Notice
Befor installation, make sure to insert the dowel pin
into correct position.
4. Remove the sealing plate (3).
Notice
Be careful not to lose 4 plastic balls and 8 steel balls
in shift housing.
5. Unscrew the bolts from shift housing and valve housing
and remove the side cover.
Installation Notice
Tightening torque
Notice
Check the valves for damage, and replace if necessary.
6. Install in the reverse order of removal.
DC 5-SPEED AUTOMATIC TRANSMISSION
REXTON SM - 2004.4
8 Nm
14 Nm
1. Bolts (29)
2. Valve housing
3. Sealing plate
3A1-75
Y220_3A1085
4. Shift housing
5. Leaf spring
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN