SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 861

4. Pressure plate
1) Check the pressure spring for wear.
Notice
The excessively worn components should be
replaced.
2) Check the alignment conditions of clutch housing
as follows:
• Install the magnetic holder on pressure spring.
• Alignment check for housing bore
A. Install a dial gauge in the housing bore.
B. Measure and record the pointer value while
rotating the crankshaft.
• Alignment check for clutch housing surface
A. Install a dial gauge on the clutch housing
surface.
B. Measure and record the pointer value while
rotating the crankshaft.
Notice
If the pointer indicates beyond 0.010 inch, align the
clutch housing by inserting shims between the
housing and clutch.
5. Concentric Slave Cylinder
• Check any heat damage, abnormal noise, poor
rotation and wear of the concentric slave cylinder
bearing.
CLUTCH
REXTON SM - 2004.4
3C-17
Y220_03C031
Y220_03C032
Y220_03C033
Y220_03C034
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN