SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 998

4C-10
DISASSEMBLY AND REASSEMBLY
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Disassembly
1. Place an alignment mark and remove the propeller shaft.
2. Place an alignment on the spiders before removing.
Y220_04C012
3. Remove the snap ring with snap ring pliers.
Y220_04C013
4. Tap the yoke shoulder on shaft with copper hammer to
remove the roller bearing. Remove the other bearings with
same manner.
Y220_04C014
PROPELLER SHAFT
REXTON SM - 2004.4