SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1161

Inspection
1. Measure the inner diameter of brake drum and replace if
needed.
New drum
φ
254 mm
Notice
Measure the inner diameter at over two points.
2. Check the contacting surface of lining and brake drum.
Mark the brake drum inside using chalk and scrub the
shoe and lining assembly. If the contact condition is
significantly poor, replace the shoe and lining assembly
or the brake drum.
Notice
Clean the marked area after inspection.
REAR BRAKE
REXTON SM - 2004.4
Wear limit
φ
255.5 mm
8C-17
Y220_08C036
Y220_08C037
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN