Parking Brake Warning - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Table of Contents

Advertisement

9B-18

PARKING BRAKE WARNING

1. The parking brake warning lamp comes on for approx. 4 seconds when turning "ON" the IGN 1 switch regardless of
the vehicle speed and parking brake switch position. After this 4 seconds, the warning lamp comes on, goes off and
blinks according to the vehicle speed and parking brake switch position.
2. The warning lamp comes on when the parking brake switch output is "ON" while the vehicle speed is below V1.
3. The warning lamp blinks and the buzzer sounds when the vehicle speed is over 10 km/h for 2 seconds with the
warning lamp "ON" and when turning "ON" the parking brake switch while the vehicle is over 10 km/h (PARKING
START WARNING).
4. The warning lamp comes on and the buzzer stops when the vehicle speed goes down below V1 in step 3.
5. The warning lamp goes off and the buzzer stops when turning "OFF" the parking brake switch with step 3.
6. The warning lamp and the buzzer do not work when the IGN 1 switch output is "OFF". (However, the vehicle speed
can be detected from 1.5 second after turning "ON" the IGN 1 switch.)
OVER V1
VEHICLE SPEED
BELOW V2
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Y220_09B064
ELECTRIC SYSTEM
REXTON SM - 2004.4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents