Renault Laguna III Manual page 2583

Compressor: Removal - Refitting
V4Y or V9X, and AIR CONDITIONING 01 or AIR CONDITIONING 02
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: refrigerant pipe seal
(30,02,02,52).
a
WARNING
Do not remove the blanking plugs from each
component until the last moment.
Also, do not remove the components from their
packaging until they are to be fitted to the vehi-
cle.
WARNING
T o avoid any leaks, check that the pipe surface is
sound before positioning the new seal. The sur-
face must be clean and scratch free.
a Remove the blanking plugs.
a Lubricate the new seals using recommended air
conditioning oil to make fitting easier (see 62A, Air
conditioning, Air conditioning: Parts and con-
sumables for the repair, page 62A-2) .
a Fit new seals to the compressor connecting pipes.
II - REFITTING OPERATION FOR PART
CONCERNED.
a Refit the compressor.
V9X
a Torque tighten the compressor bolts (25 N.m).
AIR CONDITIONING
62A-27
V4Y
a Fit the compressor bolts without tightening.
a Tighten to torque and in order:
- the compressor bolts (55 N.m) (11) ,
- the compressor bolts (61 N.m) (12) .
62A
133870
133871