HP ProCurve 7102dl Reference Manual page 1073

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set
backup auto-restore
Use the backup auto-restore command to configure the interface to automatically discontinue backup
when all network conditions are operational. Use the no form of this command to disable the auto-restore
feature. For more detailed information on PPP backup functionality, refer to the Functional Notes section
of the command backup call-mode <role> on page 1073.
Syntax Description
No subcommands.
Default Values
By default, all backup endpoints will automatically restore the primary connection when the failure
condition clears.
Usage Examples
The following example configures the SROS to automatically restore the primary connection when the
failure condition clears:
ProCurve(config)#interface ppp 1
ProCurve(config-ppp 1)#backup auto-restore
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 1071