Rep 12.61 Finisher Buffer Path Sensor; Rep 12.62 Finisher Gate Sensor - Xerox Phaser 7760 Service Manual

REP 12.61 Finisher Buffer Path Sensor

Parts List on PL 21.10
Removal
1. Remove the Finisher from the Printer
2. Remove the Punch Assembly (REP
3. Remove the Left Top Cover (REP 12.49).
4. Removing the Buffer Path Sensor (Figure
NOTE: Ensure to use a stubby screwdriver in order to remove screws because of angle.
a. Disconnect the wiring harness connector.
b. Remove 1 screw and the Buffer Path Sensor.
Figure 1 Removing Buffer Path Sensor
Revised
Phaser 7760 Color Laser Printer
(REP 12.50).
12.52).
1).

REP 12.62 Finisher Gate Sensor

Parts List on PL 21.11
Removal
1. Remove the Finisher from the Printer
2. Remove the Punch Frame Assembly
3. Remove the Left Top Cover
4. Removing the Gate Sensor
NOTE: Use a stubby screwdriver to remove the screws because of angle of the screw
locations.
a. Remove the 2 screws securing the Bracket.
b. Disconnect the wiring harness connector and remove 1 screw. Remove the Gate
Sensor.
Figure 1 Removing the Gate Sensor
January 2010
4-81
(REP 12.50).
(REP 12.52).
(REP 12.49).
(Figure 1).
Repairs and Adjustments
REP 12.61, REP 12.62