Rep 1.10 Main Drive Unit - Xerox WorkCentre 3215 Service Manual

Support Arm
Figure 11 Front Cover Support Arm Placement
Xerox® WorkCentre® 3215/3225 Multifunction Printer Service Manual

REP 1.10 Main Drive Unit

Parts List on PL 4.6
Removal
1. Switch Off the Printer and unplug the Power Cord.
2. Remove the Left Side Cover
3. Remove the screws (5) from the Main Drive Unit
4. Move the Fuser Drive Locking Lever to the Unlock position (Right)
Remove the Main Drive Unit and the Front Door Support Arm.
Figure 1 Main Drive Unit Removal
Replacement
1. Place the Front Cover Support Arm on the Stop Bracket
June 2014
4-19
(REP 1.2).
(Figure 1).
(Figure
Screws
Locking Lever
(Figure 2).
REP 1.9, REP 1.10
1).
Repairs