Show Vlan - Dell S4810 Reference Manual

Dell(conf-if-vl-100)#

show vlan

Display the current VLAN configurations on the switch.
S4810
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
brief
id vlan-id
name vlan-
name
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.1.
(0.0)
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
1060
no ip address
no shutdown
(OPTIONAL) Enter the keyword brief to display the
following information:
• VLAN ID
• VLAN name (left blank if none is configured)
• Spanning Tree Group ID
• MAC address aging time
• IP address
(OPTIONAL) Enter the keyword id then a number from 1 to
4094. Only information on the VLAN specified is displayed.
(OPTIONAL) Enter the keyword name then the name
configured for the VLAN. Only information on the VLAN
named is displayed.
EXEC
EXEC Privilege
Introduced on the S6000.
Updated to support OpenFlow.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Augmented to display PVLAN data for the C-Series and S-
Series and revised the output to include the Description field
to display a user-entered VLAN description.
Layer 2