MB86R02 'Jade-D' Hardware Manual V1.64
Bit number
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
Field name
R/W
Reset value
Dither Unit Control
Bit 8
dither_align
Dithering Align, 0b=right aligned, 1b=left aligned
Bit 7 - 6
dither_reserved_2
Bit 5 - 4
dither_format
Dithering Format, 00b=888, 01b=777, 10b=666, 11b=565
Bit 3 - 2
dither_reserved_1
Bit 1
dither_mode
Dithering Mode Register, 0b=temporal, 1b=spatial
Bit 0
dither_bypass
Bypass for Dither Unit, 0b=bypass disable, 1b=bypass enable
20.3 Limitations
There is no shadow register for the synchronization of configuration parameters during the vertical
blanking period. To avoid visible artifacts during reconfiguration, we recommend you to find a trigger
point to modify the configuration register during the vertical blanking by software.
20.4 Initialization procedure
Setup e.g. for 8 bit panel
• Select the dither_mode
• Select dither_format = 0x00
• enable dithering by setting dither_bypass = 0
If the output resolution is less than 8 bit, it's strongly recommended to enable the Dither Unit to obtain
a better visual display.
8
7
6
5 4 3 2
1
RW
RWS
RW RWS RW RW
0
X
0
X
0
H
H
H
20-5
0
1
H