Table of Contents
Advertisement
MB86R02 'Jade-D' Hardware Manual V1.64
Note:
You should only change the pin multiplex mode when none of the pins effected by the mode switch
are in use.
Fixed after bootup (configured via hardware, mode pins)
Function fixed after bootup (capture), but ITU/RGB function is still configurable by register
CMPX_MODE_4[0] (MPXTABLE5)
Function fixed after bootup (UART0), but other functions still configurable by register CMPX_MODE_9[1:0],
CMPX_MODE_2[1:0] (MPX_TABLE9)
Configurable by register (software action)
ES1/
Modification/extension ES1-->ES2
ES2
CONST0 = Drives '0' constantly to this pin.
Note: The first column of each of the following tables is the default state! If a non-specified mode is
selected then the default mode is applied (e.g. MUX Mode #0, '11' > first MUX function applies).
1-24
Advertisement
Table of Contents
