Fujitsu MB86R02 Jade-D Hardware Manual page 144

MB86R02 'Jade-D' Hardware Manual V1.64
23
CMPX_MODE_8
22
CMPX_MODE_7
21
CMPX_MODE_6
20
CMPX_MODE_4
19-18
CMPX_MODE_3
17-16
CMPX_MODE_2
15-0
(Reserved)
7-20
Selects the first or second pin multiplex function of pin multiplex table 8 (see Overview chapter).
HOST SPI master IF is available at external Pins
0
(initial value)
GPIO[11:08] is available at eternal Pins (CMPX_MODE2[1]
1
should be '0')
Selects the first or second pin multiplex function of pin multiplex table 8 (see Overview chapter).
0 PWM3-0 is available on external Pins
Serial input and serial output of UART4 and UART5 are
1
available (initial value)
Selects the first or second pin multiplex function of pin multiplex table 6 (see Overview chapter).
0 I2S IF is available at external Pins (initial value)
1 PWM7-4 is available at external Pins
Selects the first or second pin multiplex function of pin multiplex table 1 (see Overview chapter).
0 2xITU656 digital video inputs are available (initial value)
1 1x RGB666 digital video inputs are available
Selects the first or second pin multiplex function of pin multiplex table 5 (see Overview chapter).
TSG[12-4] (Timing Signals) are available
00
01 GPIO7-0 and DCLKIN0 available (initial value)
10 APIX1_SB, GPIO1-0 and DCLKIN0 available
11 Sets default mode
Selects the first or second pin multiplex function of pin multiplex table 2 (see Overview chapter).
Selects the first, second, third or fourth pin multiplex function of pin multiplex table 4 (see
Overview chapter).
Selects the second pin multiplex function of pin multiplex table 5 (see Overview chapter).
Selects the second pin multiplex function of pin multiplex table 8 (see Overview chapter).
Selects the second pin multiplex function of pin multiplex table 10 (see Overview chapter).
Selects the second pin multiplex function of pin multiplex table 11 (see Overview chapter).
DISP0 IF with RGB888 available
00
(initial value)
01 DISP0 IF with RGB666 and APIX0_SB available
GPIO23-18, GPIO15-10, GPIO7-2 and APIX0_SB
10
available
11 GPIO23-0 are available
Reserved
Writes are ignored. Reads will return a '0' at all times.